NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
VLAN not working on my GS324TP
Hi, I'm quite new to VLAN so i might have made some really stupid mistakes, however i tried. Anyway, I have a setup with a Edgerouter-X and a GS324TP Switch, with ER-X being in VLAN aware mode a...
Thanks for the reply 🙂
Here's some photos for your reference
Port 26 is the WAN port, where it goes directly to the Edgerouter
Router is in VLAN-aware mode.
The port and PVID config.
Edgerouter settings
Still cannot get it working...
10 is abolished and is removed, however that raised another question
Since VLAN1 exists, Do i have to include it in the VID as shown above?
And if so, it is impossible to set port 26 without any other VLAN memberships
WAN port is tagged, as always, but public IP still comes when connected to port 8
Do i also have to tag the port 26(WAN) in VLAN1?
Management VLAN set to 20?
Different port plugged than the one configured?
There's only one edgerouter and a GS324TP so no other ports are used.
and yes, management VLAN has been set to 20
Tommott1231 wrote:
There's only one edgerouter and a GS324TP so no other ports are used.
And that is plugged to the port #8 configured? Not the first time this happens, count me in, too
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
