dhcp snooping troubleshooting

> May I know if you are setting up trunks or static routes?

 

static routes are set on pfsense in one line:

     <staticroutes>             
                <route>
                        <network>10.1.0.0/16</network>
                        <gateway>GW_LAN</gateway>
                        <descr></descr>
                </route>
....
</staticroutes>

GW_LAN goes to 10.1.0.1 .   which is vlan 2 on the switch.

 

vlan 37  goes to the switch with  desktop computers and office phones.   that is a M4100-50G-POE.

  the lag connecting the switches  is set to vlan 37U ,  pvid 37 .

 

 the DHCP server runs on a Proxmox server.   

 

the port is U10 , T3 .       proxmox host is on vlan 10 ,   the virtualized dhcp server uses vlan 3 3.  

 I can supply more info  if needed.

 

note the programming  for vlans  and pvid is identical to the production switch that just works.

 

 I'll be on site tomorrow  working on the switch, will read the link you sent  and  try some changes.   

 let me know if i can supply more info to make our setup clearer.

 

 

thanks for the help!

 

Rob