NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Firmware Upgrade failed
Hello, we have a Netgear FS726TP that I am upgrading the firmware, What I dod was unplug everything, but my laptop, Then I placed my adapter to 192.168.0.X network, and opened up SmartControl Cente...
Hello jcastillo,
Welcome to the community!
Regarding your issue with the firmware update, try upgrading in a ladderized manner install 2.0.1_09 before jumping to 2.0.1_14. After performing the firmware upgrade, perform a factory reset by pushing the factory defaults button for 10 seconds.
Hope this helps, I'll look forward to your response.
Thanks,
Also, I forgot to mention that no matter what settings I apply, they will not stay after a reboot. Everything goes back to default.
Hello jcastillo,
Welcome to the community!
Regarding your issue with the firmware update, try upgrading in a ladderized manner install 2.0.1_09 before jumping to 2.0.1_14. After performing the firmware upgrade, perform a factory reset by pushing the factory defaults button for 10 seconds.
Hope this helps, I'll look forward to your response.
Thanks,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
