NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Firmware Upgrade TFTP Timeout
I'm unable to compete the firmware upgrade 1.6.0.4. Currently have version 1.0 I receive a TFTP Time out error when trying to update. I have downloaded and installed the Pro Safe Utility ve...
Success!!!
Had to disable firewall and security apps. Thanks for the support.
The ProSafe Plus Utility is obsolete (End-of-life) and should - leaving a few exceptions aside where no Web UI is available, or if guided by support to update e.g. the boot loader - no longer be used. Note: This utility was removed from the User Manuals a longer time ago already. Preferred way is to use the Web UI all over. By default, the protocol used by the utility is no longer active, except for the pure discovery.
An no: The problem isn't caused by the fact the ttfp is udp based.
But how can you find the IP of the switch you want to access if using just the web UI? Please keep the explanation simple as I’m very new to all this and everything I’ve read so far when seeking help assumes that the user invented string theory, in fluent Klingon.
Paul101han wrote:
But how can you find the IP of the switchStart with the NETGEAR Switch Discovery Tool (NSDT) ...
Paul101han wrote:
you want to access if using just the web UI?Once you know the switch LAN IP address you might have to put the computer network adapter to the an address of the matching IP subnet in case there was not DHCP server active when the switch was started. Or better quick y power off the switch and on again when connected to your home router LAN IP subnet.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
