GS110TPV3 Device security on port level ?

schumaku Thanks for the link to the manual.

It does go into a little more depth on the ACL principles, although not a lot.

Eventually I came up with this one:

Go to Security -> ACL -> Basic and MAC ACL:

   Create a placeholder name here. "AllowCameras"

Then go to MAC Rules... (The hard part) 

   Enter your device MAC adresses 1 at the time. But take note of the MAC Mask (I was not aware this existed)

   First I followed the manual, and used 00:00:00:FF:FF:FF  which splits up the MAC in the middle

   EC:71:DB | 6C:85:C0

   00:00:00   | FF:FF:FF

   And it is just using the first 3 positions to allow on the ports. so 1 entry will work here for me.

   But I changed it to 00:00:00:00:00:00 to make a unique set of 1 MAC Adress

After that you bind the rules to the ports you need them on.

in MAC Binding Configuration.

I do not have a clue what the difference between Unit1 Ports and LAG is.

But I’ll look at that tomorrow 😉