NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS305E - VLAN Config
Hi All,
Hopefully this is an easy question to answer but have strggled for the last few days, trying every combination to get VLANs to work.
VLAN 10 - Management
VLAN 30 - Guest
VLAN 40 - Smarthome
Eth1-4 = These should be VLAN 40 tagged. They connect to devices like TV's or AMPS
Eth 5 = Truck to the rest of the network which has VLAN tagging working fine with WAC505's.
I've tried every combination of turning settings from T to U and also PVID to 40 for ports 1-4.
Attached is what my bad research says it should look like but doesnt work
Thanks for any help in advance.
C2L_Eu wrote:VLAN 10 - Management
Eth1-4 = These should be VLAN 40 tagged. They connect to devices like TV's or AMPS
Eth 5 = Truck to the rest of the network which has VLAN tagging working fine with WAC505's.
No, ports where you connect devices like TV, AMP, computers, IoT must be always untagged.
The screenshots provided look correct, #1-4 VLAN ID 40 Untagged, PVID 40. #5 VLAN ID 40 Tagged. Double check the peer switch on the trunk is configued similar.
3 Replies
Replies have been turned off for this discussion
From the above, what I can see all traffic still goes to VLAN 1 as the IP range is that default not VLAN40 which from what i belive it should be.
Thanks
C2L_Eu wrote:VLAN 10 - Management
Eth1-4 = These should be VLAN 40 tagged. They connect to devices like TV's or AMPS
Eth 5 = Truck to the rest of the network which has VLAN tagging working fine with WAC505's.
No, ports where you connect devices like TV, AMP, computers, IoT must be always untagged.
The screenshots provided look correct, #1-4 VLAN ID 40 Untagged, PVID 40. #5 VLAN ID 40 Tagged. Double check the peer switch on the trunk is configued similar.
It was the peer switch all along!
Thanks for you help
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
