NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS308T LACP Setup problem with TrueNas Server
Hello everyone , I try to settings up the LACP protocol with my TrueNas Computer . After I configured all port as should be , no networking connection between GS308T to TrueNas . Model Name -...
Welcome to the community!
Could you also provide the LACP configuration for the TrueNAS? Also, please verify if the LACP configuration on the TrueNAS has the same hash mode as the switch.
Under PVID Configuration on the switch, please click on LAG and see if AsrockNas1 has PVID40.
Regards,
JeraldM
NETGEAR Community Team
Welcome to the community!
Could you also provide the LACP configuration for the TrueNAS? Also, please verify if the LACP configuration on the TrueNAS has the same hash mode as the switch.
Under PVID Configuration on the switch, please click on LAG and see if AsrockNas1 has PVID40.
Regards,
JeraldM
NETGEAR Community Team
Thanks for the response .
I succeeded to setup the LACP as should on VLAN40, you point at the right spot 🙂
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
