NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS728TXP (S3300-28X-PoE+) EOL Bonjour/mDNS issue
Hi:
Recently got a project relate with EOL switch S3300 for mDNS service.
It seems mDNS didn't run through uplink to other switches.
I googled and found there seems to be a firmware 6.6.4.29 solved this issue, but not been released.
I wonder if anyone can share this version ?
or any alternative way to configure for mDNS 224.0.0.251 to go through uplink to other switches ?
Currently IGMP snooping is enabled for IPTV channels and only 1 flat VLAN.
Sincerely,
Billy Lee
12 Replies
As the community is unable to reply here (and the Netgear reps tend to stay the same, or simply fail to locate or allocate internal resources): Open a ticket on https://www.netgear.com/about/contact-us/ - call (or email) them, whatever is available in your market. Sad but true.
Hi Schumaku:
Thank you for the reply.
I found it from this old post
Which descriped exactly same issue but marked as resolved when upgraded to firmware 6.6.4.29.
Sincerely,
Billy Lee
Hello BillyLee,
And welcome to the NETGEAR Community! 🙂
I found this firmware on the old issue before from Netgear support and let me know if this is the correct firmware you are looking for. Please download using the link below.
Have a lovely day,
Rene D
Netgear Team
ReneD DavidGo Can this .29 build be made available on all S3300 models: S3300-28X (GS728TX), S3300-28X-PoE+ (GS728TXP), S3300-52X (GS752TX), and S3300-52X-PoE+ (GS752TXP) - so it will be available in the future on https://netgear.com/support please?
Hi Rene:
Thank you !
This is the file which mentioned before to solve the issue.
I will use this to apply and provide feedback.
Sincerely,
Billy Lee
Hi
Just upgrade 2 of switches to test.
Found ineresting issue that it does forward mDNS now to uplink, but only for ipv6 address, not for ipv4 mDNS multicast.
Current setup is flat VLAN 1, with IGMP snooping ENABLE/check IGMP header ENABLE.
No Quierier or mRoute enabled.
Is there any setting is required to pass ipv4 mDNS 224.0.0.251 multicast to uplink ?
Sincerely,
Billy Lee
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
