NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS748Tv5 Printer Multicast blocked by Auto DoS
Hi. I recently pruchased a ProSafe Smart Switch. One of the features I wanted was Auto-DoS detection that shuts off ports that are suspected of a DoS attack. Whenever I enable this, the two Lexmark p...
Hi Joel,
Welcome to NETGEAR community！
I just check packets as your mentioned.:smileyhappy:
Please try operation as below to work around this case on GS748Tv5.
--Disable UDP port service in Denial of Service Configuration page
The root cause is the special MDNS packets that "Source port must be equal with destination port In MDSN according to RFC6762"
This option "UDP port" in Auto-DoS will drop these special packets and shutdown the port which receive its.
Let me know if this work around don't work.
Regards,
Daniel.
Hi Joel,
Welcome to NETGEAR community！
I just check packets as your mentioned.:smileyhappy:
Please try operation as below to work around this case on GS748Tv5.
--Disable UDP port service in Denial of Service Configuration page
The root cause is the special MDNS packets that "Source port must be equal with destination port In MDSN according to RFC6762"
This option "UDP port" in Auto-DoS will drop these special packets and shutdown the port which receive its.
Let me know if this work around don't work.
Regards,
Daniel.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
