NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Monitor VLAN statistics using SNMP
Hello, I've some vlans configured. I'd like to monitor VLAN statistics using ifTable MIB table. But when I test using snmpwalk, I only see entries for the physical ports...
Hi,
It's IF-MIB MIB
VLANs are not interfaces IMHO so unlikley IF-MIB. https://tools.ietf.org/html/rfc8892
One espresso later, I'd expect the port VLAN statistics to be here:
dot1qPortVlanStatisticsTable
.1.3.6.1.2.1.17.7.1.4.6
You might give it a try, some parts of .1.3.6.1.2.1.17.7 seem to be around (on similar switches) when I have it right. This is part of the Q-BRIDGE-MIB which is not supported as per the https://www.netgear.com/support/product/GC752XP.aspx#download -> MIBs.
The documentation of dot1qPortVlanStatisticsTable looks promising.
Unfortunately it's not available on the switch when I tested with snmpwalk.
I've seen VLAN interface data were available on customer's lab using IF-MIB's ifTable on Cisco devices.
Huawei also supports it using IF-MIB based on the link I posted on original post.
So I thought Netgear would also supports it.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
