NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Mosaic on decoded IP Stream
Hello guys, I have a network remote comprising of switch netgear gs724T. On One site two different stream are present on the switch with different Vlan and Multicast address Site A 1. Vl...
Site A
1. Vlan 111 - First IP Stream with a Multicast Address are pooled on port 3 4 & 5 to be connected on decoder and the stream are fine
2. Vlan 112 - Second IP stream with a multicast address is originated from an ip decoder and connected to port 11 and 12 where to be decoded on site b
On Site B
1. the Vlan 112 is beind decoded and monitored where the video is MOSAIC.
From site a to site b microwave link is used with a capacity 1 gbps and all config is ok
I am thinking that the switch is at Site A and that the VLAN 111 decoder is also on site A. Is that the case?
If so, I am guessing that there might be some packet loss on the microwave link. Do you have any way to see stats on the link?
If you temporarily put a decoder at site A (on Vlan 112), do you see the same artifacts?
Hello,
The switch is at site A and the decoder for Vlan 111 is at site A confirm.
I have check the microwave link and it was checked by an expert but there was no packets loss on microwave link, no errors observed
If i put a decoder at Site A for Vlan 112, yes i see same artifacts!
If i put a decoder at Site A for Vlan 112, yes i see same artifacts!
Ok, I think that rules out the microwave link.
If you switch the two sources, does the problem move with the source, or does it stay with the VLAN?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
