NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
SFP ports don't work after firmware update
After upgrading the firmware from 1.0.4.16 to 1.0.5.12 my SFP ports no longer work. I am using RJ45 SFP adapters that were working perfectly prior to the update. I have also tried version 1.0.5.22 wi...
I switched to genuine Netgear adapers and everything is working fine
Hm, more a GC510P or GC510PP? I would not write here without my GC510PP SFP ports in workable condition 8-)
The v1.0.5.12 (same for the GC110, GC110P, GC510P and GC510PP) is more than one year old - not sure why you upload such an dated version - as per the records Netgear pushed these and newer versions on Insight over the last 12 or 13 months. In local management, you could consider to upload GC110 / GC110P / GC510P / GC510PP Firmware Version 1.0.5.25 to the same Flash section (not to loose 1.0.4.16).
I did try the latest 1.0.5.25. That's where I first noticed the problem. I went from 4.16 to 5.25. Down graded to 1.0.4.16 and they work, decided to start with .15 and see if it would work. It didn't so I didn't see a need to go back to .25 until I checked to see if this was an issue anyone else had.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
