NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Switch VLAN issue
Using 16 port Netgear Switch GS716T (version 3 i believe) Port 1 cabled to Router Port 2 cabled to Access Point Port 3-16 client devices Switch has default VLAN 1 Access point guest traffic g...
schumaku wrote:Does the router support multiple networks - yes, (router is a Sonicwall TZ350)
is the router port configured for the additional tagged VLAN - yes, (guest network is configured with a guest IP network)
is there a dedicated IP subnet configured on this additional network- yes,
and last but not least is there DHCP service active for the additional network - yes (DHCP service is checked for the subnet)
I just checked all of these and they appear to be set correctly.
so there is not a need for the VID configuration to set these 2 ports to vlan 10? again the 2 ports are the internet connection to the switch and the AP port on the switch).
Thanks!
Darryl
Both the port to the router and the AP need to have this VLAN 10 added as tagged. Check the Sonicwall config for proper tagging on the same port.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
