NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Switches in the stack. There is no Agent in the Host switch.
Hello everyone
I have this situation.
I have two switches stacked and connected with an AGC761 cable. Unit1 is GS752 and unit2 is GS728. Switches are also connected by a pachycord on ports 1. This connection is active. Both switches work.
The problem I noticed was:
- no active link on ports where the stack cable is plugged in.
- in unit1 (master) I do not see a second switch (slave) in the stack configuration.
Is the stack really not working? The unit1 display shows ID1 and the unit2 shows: active Stack / Master and ID2.
Is the connection between the switches via a pachkord on ports 1?
How do you restore the correct stack configuration? Is a restart enough?
Thanks for the suggestion.
Greetings
Tomek
Editor: Edited for Clarity
If you want to reconnect the stack, it is recommended to reboot all switches on a stack in order for it to elect its Master. Please make sure that the ports are assigned as Stack and not Ethernet.
Regards,
John
NETGEAR Community Team
1 Reply
If you want to reconnect the stack, it is recommended to reboot all switches on a stack in order for it to elect its Master. Please make sure that the ports are assigned as Stack and not Ethernet.
Regards,
John
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
