DHCP problem SRX5308 – ProSAFE Quad WAN Gigabit SSL VPN Firewall

Question

Hi,I have less than 100 users with 200 available ips in the dhcp pool..Latest firmware 4.3.5-3New clients cannot obtain an ip...I read the similar topics.. i reset it and reconfigure... But same problem..Is there any new solution except downgrading?Thanks.

SamirD · Answer

You need to think of firmware versions as 'feature sets'.&nbsp; Generally, across other manufacturers of smb routers, there are bugs in the firmwares that cause problems with features that once worked correctly.&nbsp; Hence, why 'downgrading' to a different firmware version fixes the problem for you.
&nbsp;
On our enterprise grade routers, this generally isn't an issue, but enterprise routers can cost 10x the cost of smb routers, so it's a little of 'you get what you pay for'.&nbsp; That being said, we love the realibility and performance of the smb class of routers if you can get a set up that works correctly and consistantly for the appliation as the bang for buck is off the chart.

JohnC_V · Answer

Hi&nbsp;mhndsh,

&nbsp;

Have you tried to change the subnet of your LAN from /24 to /16?

&nbsp;

Regards,

mhndsh · Answer

No, but i downgraded the FW and it's ok with old version.. is it a bug in the last version? and what is the last recomended stable version?
thanks

Nodism1125 · Answer

Have you tried manually configuring the router setting instead of using the same router config? After upgrading the firmware to version 4.3.5-3.&nbsp;
&nbsp;
&nbsp;
&nbsp;

mhndsh · Answer

&nbsp;
Thanks for reply..as i mentioned, yes i did ( i reset it and reconfigure, but same)
i didn't (using the same router config)
&nbsp;

Forum Discussion

DHCP problem SRX5308 – ProSAFE Quad WAN Gigabit SSL VPN Firewall

5 Replies

Related Content

ProSafe Srx5308 Firewall

BR500 Firewall Problems

Bridge 2 Networks with SRX5308 Help

RS700 firewall

Firewall nur für das LAN

NETGEAR Academy

ProSupport for Business