NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Failover UDP DHCP relay M4300-52G-PoE+
Hi All, I'm currently using UDP DHCP relay on M4300-52G-PoE+ switch to point to a DHCP server in our network per VLAN interfcae, server itself is Windows 2012R2 VM. DHCP works perfectly fine. No...
Hi dt987,
I don't think that it is recommended to have a failover on DHCP. As the DHCP server doesn't have the capability to detect if it still online or not. This will only cause an IP conflict on your network. It might be better if you will just set the clients that you have to static ip in order to retain the IP addresses. Even if it fails, it still have its own IP.
Regards,
Well, that would be true if DHCP servers are not on Windows 2012R2 in DCHP failover cluster:
https://technet.microsoft.com/en-us/library/dn338978(v=ws.11).aspx
DHCP servers will constatnly sync leased IP addresses so there will be no confilct in case of failover.
So the question remains if it's possbile to add two DHCP UDP relay on Netgear VLAN interface
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
