NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
FSV 338 Slow VPN speeds
Hello there, we are using a FVS338 (FW: 3.0.6-25) Remote access via VPN client is a pain to use mainly because of speed. (5 clients on various OS's report the same issue). Is there anything i c...
Hi John,
thank you for your Reply.
Our ISP "should" not be the bottleneck here, our bandwidth (office) is somewhere in the realms of 80/15 (speedtests confirm this). I have heard some providers like to throttle VPN connections specifically. The speed was however described to me to feel more like a 56kbit line so i doubt the Bandwidth used (office/remote) has anything to do with it being so slow.
As you suggested i will try a firmware update to see if that fixes it.
A factory reset is not an option JET. I'm simply to scared to break something.
It would be interesting to know, if any one else has this problem and if it even can be fixed without a change of hardware. I know the FSV 338 is restricted in its bandwidth and i would never expect 80 Mbit but something around 5-10 Mbit would certainly be nice.
thanks again,
Kevin
Thank you for that information. The FVS338 can only handle IPsec tunnels up to 19mbps only and this is a product limitation already. You are also correct that the bandwidth is restricted as this is only a 10/100 firewall router. I suggest replacing the hardware may resolve your issue here.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
