NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Full FVS318 VPN network accessibility from NetGear ProSafe VPN Client Lite
Hi everyone ! Two FVS318s are connected via the Internet into a single VPN. Local addresses of one network 192.168.0.0, second 192.168.1.0 Everything works well, devices on one network are acce...
Welcome to the community! :)
Since the site-to-site VPN is working fine between the 2 FVS318G, why not just use it to access the device on the 192.168.0.1?
Be informed that the ProSAFE VPN Firewall Routers of NETGEAR is already EoL (End of Life) and this also includes the ProSAFE VPN Client software.
Regards,
DaneA
NETGEAR Community Team
Thanks for the answer ! :)
This is an interesting simple solution, but my task is somewhat more complicated and from the VPN software client I need to see both segments of the VPN network (192.168.1.0 and 192.168.0.0).
I figured it out a bit and changed the subnet mask to which I connect in the settings of the VPN software client and in the corresponding entry for the software client on the router.
Instead of 192.168.1.0 mask 255.255.255.0
i wrote 192.168.1.0 mask 255.255.254.0AND MIRACLE!
Router 192.168.0.1 started pinging!
However, this router itself blocks further access to the addresses 192.168.0.2 - 192.168.0.254 from the software client
VPN (with the address I will remind 10.10.10.2)I tried to add this address (10.10.10.2) to the Security LAN DMZ Rules section (both directions) on the router with the address 192.168.0.1
But the miracle did not happen :( :(
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
