NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
FVS336Gv3 & FVS336Gv2: Is there a trick to getting CLI "show net lan dhcp logs" to show you the log?
I found the CLI manual for the FVS336Gv2 at http://www.downloads.netgear.com/files/GDC/FVS336GV2/FVS336Gv2_RM_18DEC14.pdf , and it shows a whole list of commands, including show net lan dhcp logs. Wh...
Hi cathyf,
What is the current firmware version of both of the FVS336Gv3 and FVS336Gv2? If ever the firmware is not yet the latest version, I suggest you to update the firmware to the latest version. The latest firmware for the FVS336Gv3 is v4.3.5-3 and you can download it here. Whereas, the latest firmware for the FVS336Gv2 is v4.3.3-6 and you can download it here. Be sure to perform a factory reset on both FVS336Gv3 and FVS336Gv2 after upgrading the firmware then reconfigure it from scratch in order to start clean using the latest firmware version. Then, check if you will be able to get an output when you execute the command: show net lan dhcp logs.
Regards,
DaneA
NETGEAR Community Team
Most of our routers are at the latest firmware, although we do have a sprinkling which are at various earlier versions, and I have not found any router which returns data from the show net lan dhcp logs command. So I am pretty sure that it's been broken through multiple versions, if it ever worked in any version.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
