NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
SNMP polling issue FVS336GV2
Hi all, Working on setting up snmp polling from a server on the LAN polling the LAN address assigned to the firewall with no luck. Few things I've noticed, I did a packet capture from the snm...
Hi kbnetrix,
I'm not sure if this will help. Can you try to update the firmware from v3.1.1-08 to v4.3.3-6 and check if it would help. You may download firmware v4.3.3-6 here. Be reminded that its best to perform a factory reset after upgrading the firmware to have a fresh start using the latest version of the firmware.
Regards,
DaneA
NETGEAR Community Team
Hi kbnetrix,
Welcome to the community! :)
On the web-GUI of the FVS336Gv2, go to Security > Firewall > Attack Checks. Under the LAN Security Checks portion, is there a check mark on the box that says "Disable Ping Reply on LAN Ports"? If yes, kindly uncheck it then click Apply. Observe if this resolves your concern.
Regards,
DaneA
NETGEAR Community Team
DaneA, thanks for the response, however neither of the LAN security options are checked.
Hi kbnetrix,
What is the current firmware version of the FVS336Gv2?
Regards,
DaneA
NETGEAR Community Team
Running - 3.1.1-08.
h
Hi kbnetrix,
I'm not sure if this will help. Can you try to update the firmware from v3.1.1-08 to v4.3.3-6 and check if it would help. You may download firmware v4.3.3-6 here. Be reminded that its best to perform a factory reset after upgrading the firmware to have a fresh start using the latest version of the firmware.
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
