NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SRX 5308 Site-to-Site VPN not fully working
Hi all,
New to the SRX5308 and Site-to-Site VPN. I have used the wizard and believe that I have a successful tunnel between two SRX5308. I have done nothing other than run the wizard. I can...
You may want to open a chat or online support ticket with the NETGEAR Support Team and attach the logs so that it will be forwarded to the engineering team for it to be analyzed.
Kindly try to use another WAN port of the SRX5308 on both Site A and Site B. Then, set up a VPN tunnel using the VPN Wizard as well. Check if the same problem will occur. You may want to perform a factory reset on both SRX5308 then reconfigure the setting from scratch and observe.
Regards,
DaneA
NETGEAR Community Team
DaneA-
Thanks for your help so far. One last question however. Is traffic on the site-to-site VPN runnning behind the firewall such that all ports both UDP and TCP be unrestricted by default? In other words VPN traffic should not affected by firewall rules?
Thanks,
James
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
