NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
SRX5308 and VOIP
Current firmware: 3.0.7-24 We have a problem with VoIP, telefony works fine but status LEDs on phones do not show status (busy/free). The latest firmware 4.3.4-1 states the following in the release...
Hi, sorry for the delay.
today we disabled SIP ALG and rebooted the firewall. Now everything is workingn as expected.
Thanks,
/Mats
Hi, Thanks for your reply.
Yes, SIP ALG is checked.
However, I'm unsure if we've rebooted the unit since checking it. Unsure if that matters though.
kind regards
/Mats
Hi Mats-S,
Let us try this. Reboot the SRX5308 then check if same problem will occur.
If ever same problem will occur, uncheck the box that says "Enable SIP ALG" then click Apply. Observe if same problem will occur.
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
