Forum Discussion

Aspirant

Sep 15, 2015

SRX5308 no Internet access on 2nd VLAN

I am using the details provided at http://kb.netgear.com/app/answers/detail/a_id/8898/~/2-vlans-accessing-internet-using-layer-2-switch-%26-router to configure a 2nd VLAN for guest wireless access. I...

Troubleshooting

vlan

Sophostry

Aspirant

Sep 15, 2015

When creating a second VLAN, unless using the DMZ, it should have internet access by default if the other VLANs do. Do you have an outbound rule for the 2nd VLAN that blocks everything?

jhodges8

Aspirant

Sep 15, 2015

My default outbound rule is to allow all traffic. Is there a log on the SRX to see if it is dropping packets?

DaneA
NETGEAR Employee Retired
Sep 16, 2015
Hi jhodges8,

jhodges8 wrote:

Is there a log on the SRX to see if it is dropping packets?

Yes, there is. Kindly read pages 362-366 of the SRX5308 reference manual here.

Regards,

DaneA

NETGEAR Community Team
- jhodges8
  Aspirant
  Sep 23, 2015
  Ok, nothing showing in the log and still no access for 2nd VLAN.
  - DaneA
    NETGEAR Employee Retired
    Sep 23, 2015
    Hi jhodges8,
    
    Kindly answer the questions below:
    
    a. What is the current firmware version of the SRX5308?
    
    b. Have you double-checked the physical connections?
    
    c. Have you tried to reset the SRX5308 back to factory default settings then reconfigure it from scratch?
    
    Regards,
    
    DaneA
    
    NETGEAR Community Team