Forum Discussion

Aspirant

Oct 15, 2018

Solved

SRX5308 Subnet Bridging

Hi there! We have two different locations that are connected by a direct gigabit connection provided by ISP. Location 1 subnet: 192.168.1.x Location 2 subnet: 192.168.2.x Currently t...

Troubleshooting

JohnC_V
Oct 22, 2018
sethrb,

We can communicate these 2 locations by setting up inter-VLAN routing on the SRX5308 that will serve as a bridge for 2 locations or you can setup a static routing. You can see an example on how static router is created this following link (see page 131).

Regards,

JohnC_V

NETGEAR Moderator

Oct 17, 2018

Hi sethrb,

Welcome to our community! :)

Please make sure that the DHCP server in location 2 is disabled and the DNS Proxy is enabled. May you be able to provide a network topology so that we can understand where the issue is?

Regards,

sethrb

Aspirant

Oct 19, 2018

Hi! Thanks for your response : )

The SRX units are not serving DHCP. Our AD domain controllers at both sites are doing that. Topology as it is now is basically like this attached photo I made quickly. What we want to do is get rid of the bridging server and just use the SRXs to do the bridging part. Let me know if this helps!