NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SRX5308 Throughput Reduced with Firewall Rules
I will narrate the issue just so that it can be documented. I hope it can be passed along as far as it needs to be fully resolved. My Gigabit Fiber WAN is very stable and does not fluctuate. SRX5...
I had some issues with my SRX-5308 (Router rebooting with no reason ...)
So I've tried upgradging from firmware srx5308_v3.0.7-45 to srx5308_v4.3.1-22
After the good surprise that all my settings ( :confused: in fact a previous copy of oll my settings) has been reloded after upgrade, i had for the fist time the speed limit problem : WAN @ 300Mbs / LAN @ 100MBs
I've reseted the router to factory settings -> speed OK :)
Set some Firewall rules (simple stuff : 2 http; 2 https) -> OK :)
Rebooted -> Speed issue :(
Reloaded backup config (lots of rules) & Reboot :( no more luck
Disabled All firewall rules & Reboot :)
Re-validated rules (no reboot) :) still runnig at full speed
Trick worked but I don't feel secure ...
So I've tried upgradging from firmware srx5308_v3.0.7-45 to srx5308_v4.3.1-22
After the good surprise that all my settings ( :confused: in fact a previous copy of oll my settings) has been reloded after upgrade, i had for the fist time the speed limit problem : WAN @ 300Mbs / LAN @ 100MBs
I've reseted the router to factory settings -> speed OK :)
Set some Firewall rules (simple stuff : 2 http; 2 https) -> OK :)
Rebooted -> Speed issue :(
Reloaded backup config (lots of rules) & Reboot :( no more luck
Disabled All firewall rules & Reboot :)
Re-validated rules (no reboot) :) still runnig at full speed
Trick worked but I don't feel secure ...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
