Forum Discussion

Aspirant

Mar 12, 2018

Solved

[Bug] Daylight Saving time Implementation

Model: WAC730 ProSAFE Dual Band Wireless AC Access Point Firmware: 3.7.11.0 Appearently the offset of the Daylight saving time is not always adjusted correctly regarding specific timezone differ...

Firmware

DaneA
Mar 13, 2018
Hi GordnFreeman,

Welcome to the community! :)

I suggest you to upgrade the firmware of your WAC730 to the latest version which is v3.8.3.0. One of the fixes include showing proper time based on time zone configured during DST period. You can download firmware v3.8.3.0 here.

Be reminded to perform a factory reset to your WAC730 after upgrading the firmware then reconfigure the settings from scratch in order to start clean using the latest firmware version. Observe if same problem will occur.

Regards,

DaneA

NETGEAR Community Team

DaneA

NETGEAR Employee Retired

Mar 13, 2018

Hi GordnFreeman,

Welcome to the community! :)

I suggest you to upgrade the firmware of your WAC730 to the latest version which is v3.8.3.0. One of the fixes include showing proper time based on time zone configured during DST period. You can download firmware v3.8.3.0 here.

Be reminded to perform a factory reset to your WAC730 after upgrading the firmware then reconfigure the settings from scratch in order to start clean using the latest firmware version. Observe if same problem will occur.

Regards,

DaneA

NETGEAR Community Team

RaghuHR
NETGEAR Expert
Mar 14, 2018
GordnFreeman Are you able to update to latest 3.8.3.0 firmware and see your time is correctly updated?

Thanks,

Raghu