NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Daisy
I have tried this before, but I will try again. If you have areas that are beyond the range of the router/internet access point, and if they are hard to connect by ethernet, do you: a) use Orbi d...
How far are you trying to reach?
Many look at point to point systems like netgears airbridge or cheaper point to point systems from other vendors.
It is a Victorian house, so very difficult to get ethernet except possibly via the roof space. Distance from Internet router to furthest point is probably only perhaps 100', but through brick internal walls. I could either daisy chain three or four Orbi's, or I could try to lay ethernet in the roof space and use WAP's in the roof, with another WAP connected to each of those.
The brick walls definitely make it a challenge. A point to point system wouldn't be even close.
Any chance there's coax throughout the home?
If so, you could look at moca adapters (ethernet over coax) to connect the orbi's
Or you could look at powerline devices to connect the orbi.
Sadly, daisychaining does work but because the backhaul is wireles, it can get sketchy in homes like yours.
Yes, that's what I am worried about. But I currently use a UniFi WAP with a wireless relay to another UniFi WAP and it does mostly work. If I use the Orbi's, I could lay them in a pattern to provide the link through plaster walls and ceilings, by placing them in the right places. If I lay ethernet in the roof space, and put two or three WAP's in the roof, pointing down, then I could put two or three other WAP's on the ground floor with a wireless back haul to the WAP's in the roof. But it is a lot more work than Orbi's.
I do have coax, but by the time I have connected the coax to the router, via ethernet, I am most of the way towards a WAP solution.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
