NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Guest network issue
Hi,
I have a WAC510 on the attic which is working fine. A network cable is plugged in the WAN port and is providing access to the internal network (VLAN1) and the guest network (VLAN10) by wifi.
When I plug a device in the LAN port, an ip address of VLAN1 is provided.
I would rather have an ipaddress of VLAN10 instead.
Is that possible ?
Thanks for any suggestions.
Manuel
2 Replies
Talking of a WAC510 in router or in AP mode?
In AP mode, none of the Small Business WAC5xx or WAX6xx (very few models have two Ethernet ports, from wally brain only the WAC510, WAC540, WAX625, WAX630 and WAX630E) officially allow configuring the second port associated with another VLAN - the second Ethernet port is always reserved for LAG-configurations, for concurrently connecting into the same network.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
