NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WNDAP660 Connectivity Issues
I'll try to keep this story as short as possible. I run a small office and about two years ago I upgraded an older netgear G only access point to a newer WN203. All was well for about a year. Then I...
So since the firmware upgrade and a factory reset this has been working.
Thanks for your suggestions but as stated previously my WNDAP660 locks in BOTH 2.4 and 5GHZ with AMPDU enabled with 20/40 Dynamic Channel Bandwidth.
Currently the ONLY thing that fixes the problem is disabling AMPDU.
My 2 WNDAP660's have now been running for 2 weeks without issue.
However as esaym says this is not really acceptable for a business class router with 802.11n.
This looks like a firmware issue to me with AMPDU handling. All the suggestions so far do not fix the locking of the channels except disabling AMPDU.
Is this accepted by Netgear as a bug right now?
Regards
David
So far I'm a week in and problem free. I only have disabled WMM power save and have AMPDU enabled. The other differences in my network are that the Comcast router is in Bridge Mode. Previosly it was not and I had just turned off the radios. And I don;t have a Firestick connected to my TV any longer. I'm not sure if those items effected the operation of the WAP.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
