NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WAC720 Back to standalone
My English is very poor, this is translated by google. Please understand! WAC720 requires Back To Standalone and runs multiple times in Console Firmware-upgrade-tftp firmware.tar 192.168.1.200 The...
Hi djccy,
Welcome to the community! :)
Just to verify, was the WAC720 managed by a wireless controller before? Kindly try to factory reset the WAC720 after the TFTP firmware upgrade.
Let me share the forum thread below and hope it helps:
Regards,
DaneA
NETGEAR Community Team
Hi djccy,
Welcome to the community! :)
Just to verify, was the WAC720 managed by a wireless controller before? Kindly try to factory reset the WAC720 after the TFTP firmware upgrade.
Let me share the forum thread below and hope it helps:
Regards,
DaneA
NETGEAR Community Team
Thank you!
1, yes, WAC720 was previously controller management. Now the controller is broken.
2, I have to press the reset button to restore it to factory settings, but this is not useful
3, successfully uploaded many times firmware, but can not always run new firmwareI have read the post you shared. But I don't understand the following:
(So I found a command on the console to simply TFTP the .tar file to the /tmp folder on the WAC730. Then once it was in place I ran another script called firmware-upgrade or something like that pointing it at the same .tar file )
He said after uploading the firmware to /TMP. What commands are entered to run the new firmware?
Thank you again!I apologize for the late response. Let me share the forum thread below:
Regards,
DaneANETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
