NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Chris480's avatar
Chris480
Aspirant
Aug 16, 2019
Solved

WAC730 Ensemble firmware upgrade issue - Access Denied

I've just  upgraded my WAC730 AP's ensemble from 3.9.0.3 to 3.9.1.0 when I try and log on now I get the following message after entering the log on credentials.    400 Bad Request [Access Denied] ...
  • RaghuHR's avatar
    RaghuHR
    Aug 16, 2019

    Chris480  That is correct.

     

    there is no option to set the FQDN in Configuration>Ensemble->Managment (IP address) this has to be in the form 192.168.x.x

Chris480's avatar
Chris480
Aspirant
Aug 16, 2019

Hi,

 

Many thanks this has fixed the direct access to the AP's via FQDN. However, one last problem remains which is that you can set the IP Address to Manage Ensemble (IPv4). If you go to the FQDN for this then you get the same error as before. I assume this is because there is no option to set the FQDN in Configuration>Ensemble->Managment (IP address) this has to be in the form 192.168.x.x

 

Thx

 

Chris

RaghuHR's avatar
RaghuHR
NETGEAR Expert
Aug 16, 2019

Chris480  That is correct.

 

there is no option to set the FQDN in Configuration>Ensemble->Managment (IP address) this has to be in the form 192.168.x.x

  • Chris480's avatar
    Chris480
    Aspirant
    Aug 16, 2019

    Ok. Many thanks for your time. Worth adding the FQDN for the ensemble in a future release.

     

    Chris

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More