NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WAX20x Throughput Fix - Use the LAN ports for Ethernet
New here, did a quick search, didn't find the specific issue I had. Recently purchased a WAX206 home router to take advantage of WiFi6 in some new gear. After setting it up as an AP I ran some spe...
You shouldn't need it in the lan port. It should be in the wan port. You can check your port statistics. Maybe its only linking at 10/100mbps and not gigabit.
Did you try swapping in a different cable? Try a good quality cat 6 cable
You shouldn't need it in the lan port. It should be in the wan port. You can check your port statistics. Maybe its only linking at 10/100mbps and not gigabit.
Did you try swapping in a different cable? Try a good quality cat 6 cable
Only thing changed was moving the uplink cable from the WAN port to a LAN port.
But, just to verify, I put the uplink cable back in the WAN port and ran another speed test. Faaast speeds still. The WAN port must have negotiated a lower link speed and got stuck there.
Thanks for the input!
maybe it wasn't quite pushed in all the way.
If its working fine now, you can mark it solved so others aren't trying to fix it
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
