NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WNDAP660
I have connected external antennas to the Prosafe access point. However I am unable to locate the setting in the interface to switch from internal to external antenna. The set up instructions indicat...
Advanced -> Advanced Wireless Settings -> Antenna
Select one of the following radio buttons to specify the antenna:
• Internal. Enables the internal antenna. This is the default setting.
• External. Enables an optional external antenna or antennas.Note: This setting does not apply to the 802.11a/na modes. The way I read this: 2.4 GHz only, not 5 GHz.
Reference: NETGEAR ProSAFE Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 Reference Manual, p.108 ff.
Moderator, please move subject (and it's duplicate post) to the Business Wireless section, thx.
Advanced -> Advanced Wireless Settings -> Antenna
Select one of the following radio buttons to specify the antenna:
• Internal. Enables the internal antenna. This is the default setting.
• External. Enables an optional external antenna or antennas.
Note: This setting does not apply to the 802.11a/na modes. The way I read this: 2.4 GHz only, not 5 GHz.
Reference: NETGEAR ProSAFE Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 Reference Manual, p.108 ff.
Moderator, please move subject (and it's duplicate post) to the Business Wireless section, thx.
Many Thanks
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
