NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
DHCP not routed on VLAN with insight cloud
Dear Community, I have a challenge I not get resolved. Hope you have some ideas how to fix it. The setup of concern is: 1. BR500 (Out on Port 2, VLAN 20 tagged, PVID 20, DHCP Server on V...
Aristomastrosi wrote:...
2. GC108PP(In on Port 2, VLAN 20 tagged, PVID 20)
(Out on Port 6, VLAN 20 tagged, PVID 20)
3. Layer 2 Switch
...
There is the issue marked in bold text: As there is a plan L2 switch the VLAN 20 must not be tagged ... otherwise all ports (permitting the simple L2 switch does handle it correct) will run tagged VLAN, including the link to the client. Change the config for the link to the L2 switch on port 6 to VLAN 20 [U]ntaged PIVD 20.
Aristomastrosi wrote:...
2. GC108PP(In on Port 2, VLAN 20 tagged, PVID 20)
(Out on Port 6, VLAN 20 tagged, PVID 20)
3. Layer 2 Switch
...
There is the issue marked in bold text: As there is a plan L2 switch the VLAN 20 must not be tagged ... otherwise all ports (permitting the simple L2 switch does handle it correct) will run tagged VLAN, including the link to the client. Change the config for the link to the L2 switch on port 6 to VLAN 20 [U]ntaged PIVD 20.
- Of course! Looks like I used for too long L3 switches, unbelievable that I have not seen this. Anyways thank you so much, Schumaku!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
