NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Configuration for both Qlan and Dante
Hello, i have an audio installation using Qsys Cores with Qlan and Dante software with a primary and backup audio network in redundancy. there is only audio in that network So my primary and ba...
Hi Laurent,
Well...... it's so simple!
i didn't know the Qsys profile would handle directly Qlan and also Dante!
Thank you for your Quick answer,
Fabrice
Hi Laurent,
In the Qsys profile configuration page there is a PTP-TC Option.
When should i use it ?
Fabrice
Please leave it Disabled as it is by default.
PTP-TC is stamping PTP packets with the residency time in the switches (delay_req field) and you can notice it is enabled by default in AES67 Audio profile, because InterComm systems in general require it, coming from Broadcast/SMPTE world.
In the Q-SYS profiles, we set it disabled by default, because most installations don't require it. It comes down to how your Q-SYS Designer is configured. If you don't know about it, I would advise to let the PTP-TC disabled for now.
NETGEAR Academy
Master AV-over-IP networking, multicast protocols, and troubleshooting to confidently deploy and manage AV networks.
Join Us!
