NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
M4250 driver update issue
After support got my switch running. the switch has worked just fine. I updated it because I was going to trunk a new switch. After the update. I now have 2 cams showing on 192.168.12 and 2 showing u...
Finally figured it out.
For some reason the 2 cams had reverted back to static ip addresses.
Not sure where the .100. came from as the cams factory setting was a .1. address
Whatever, its back to working
I ended up resetting the switch and used engage to get it setup.
I just changed the default DATA to NDI on all the ports
To add a vlan for DATA. do I just leave the dhcp stuff greyed out so that I can it gets seen by my ip scanner?
Can I just copy the Engage exe file to a usb stick so I can control from my home and location I work from?
Finally figured it out.
For some reason the 2 cams had reverted back to static ip addresses.
Not sure where the .100. came from as the cams factory setting was a .1. address
Whatever, its back to working
NETGEAR Academy
Master AV-over-IP networking, multicast protocols, and troubleshooting to confidently deploy and manage AV networks.
Join Us!
