Orbi Mini Pro SXK30 (SXR30+one SXS30) with WPA2 Enterprise setup

Hello everyone,

I have successfully set up freeradius auth with SXK30 (firmware v110). But there is one annoyng thing. When wifi client tries to authenticate with router (SXR30) the process goes smoothly and client gets connected and roaming from router to satelite works as expected.

The problem begins when wifi client tries to authenticate with satelite (SXR30, because when satelite signal is better this is the case). The client can not connect to the wireless network. The issue, as I investigated (debug log analysing, network monitoring), is: when connecting to router, it makes connection to radius server as expected. But satelite never accesses radius server nor instructs router to access it no matter what.

This radius server aso works with other 2 APs without problem. Freeradius has both router and satelite IPs as clients configured with proper secret etc... (As I said router authenticates with radius correctly). Unfortunately satelite never connects to radius server itself. I've tried 3 EAP methods: PEAP, EAP-PWD and EAP-TLS with the same success(router)/failure(satelite).

Question: is this expected behavior and satelite auth just not implemented in this product? Or maybe there is something that can be done to address this issue?

Regards

bb