MS60 SATELLITE WONT SYNC TO MR60 ROUTER

Question

HELLO&nbsp;my MS60 satellite keep blinking white all the time.&nbsp; i had the system working fine for a long time and i unplug one satellite to take it to another room and since then the satellite only blink white like trying to sync, this is 3 days ago. i tried the app satellite configuration, pressing the sync buttom, turning of and one many times and before i reset to factory settings the router and satellite the network map showed 1 of 2 satellite.I made factory reset to the satellite and it didnt sync and stayed the same even pressing the sync buttom many times, i configure the network with no problem and the network map now only show 1 of 1 satellite the other one the network cant find it or viceversa.&nbsp;i dont know what to do i dont know how to see my satellite to check if it has the same firmware as the router or how to make it sync to the router, i dont think the satellite is damage.

michaelkenward · Answer

Eusile78&nbsp;wrote:
HELLO
&nbsp;
my MS60 satellite keep blinking white all the time.&nbsp; i had the system working fine for a long time and i unplug one satellite to take it to another room and since then the satellite only blink white like trying to sync, this is 3 days ago.

Have you tried moving the satellite back nearer to the router?

Just another user with time on their hands.
&nbsp;

Eusile78 · Answer

Yes all the reset and unplugging I have done it with the satellite near the router and still the satellite is blinking white and no change, even i unplugged the other satellite and plugged in to the power and start blinking white then red and then blue just like it use to do the one that is not syncing.

michaelkenward · Answer

Eusile78&nbsp;wrote:even i unplugged the other satellite and plugged in to the power and start blinking white then red and then blue just like it use to do the one that is not syncing.
Not sure that I follow that.
&nbsp;
Do you mean that the second satellite, the one that you moved, does connect when you turn off the first satellite?

Just another user with time on their hands.
&nbsp;

Eusile78 · Answer

Sorry about it, first satellite still work fine and syncing with no problem with or with out the second satellite in the network (the one that don’t work) first satellite is in a room away from router.The second satellite is not syncing after I did several unplugs and factories resets (did the same thing to router at same time) it stay blinking white all the time.I don’t know if you need more info?

michaelkenward · Answer

Eusile78&nbsp;wrote:Sorry about it, first satellite still work fine and syncing with no problem with or with out the second satellite in the network (the one that don’t work) first satellite is in a room away from router.
My question was about removing the first (working) satellite from the network before you try to connect that troublesome one. Something a room away from the router seems a bit close. The WiFi should get that far without a satellite.
&nbsp;
Do you actually need the second satellite?
&nbsp;
And remember that whenever you play around with these things it is important to start the network in the right order.
&nbsp;
Be sure to restart your network in this sequence:

Turn off and unplug modem.
Turn off router and computers.
Plug in and turn on modem. Wait 2 minutes for it to connect.
Turn on the router and wait 2 minutes for it to connect.
Turn on satellite.
Turn on computers and rest of network.

&nbsp;

Just another user with time on their hands.
&nbsp;

Forum Discussion

MS60 SATELLITE WONT SYNC TO MR60 ROUTER

6 Replies