NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
IKEv2 with MR1100
Hey all,
I was wondering if anyone had used the MR1100 to connect to VPN on IKEv2? I have had issues connecting to my work VPN using this protocol and wondered if anyone else had this experience?
Can netgear advise if this protocol is supported on this router?
Cheers,
Felix
4 Replies
Hi All,
Further to this I have also tried using my old AC800s and have got the same issue of trying to connect to my work vpn.
I have tried the following with both Modems:
VPN Passthrough
DMZ mode to static IP
My work vpn uses UDP ports 500 and 4500 but I cannot connect.
It cannont find in the web interface anything to make sure these ports are open.
I have been able to use an old huwawei modem and connect fine.
Any help appreciated.
Cheers,
Felix
- Sounds like you have a different router to the XR series so would recommend posting in the Nighthawk section: https://community.netgear.com/t5/Nighthawk-WiFi-Routers/bd-p/home-wifi-routers-nighthawk
Hi Netduma,
I have tried this with two netgear routers:
The Netgear Nighthawk M1 MR1100
And the Netgear AC800s.
I am wondering if other people have had problems with these two devices and IKEv2 VPN connections?
Cheers,F
