NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Granular 2.4GHz Power Control & mDNS Optimization for Orbi 970 (RBS970)
Dear NETGEAR Engineering Team, As a user of the flagship Orbi 970 (RBE970) system, I am writing to express frustration over the lack of advanced radio management in the current firmware. In high-den...
You'll need to post this here to make requests to NG:
Submit Ideas for Home Products | NETGEAR Communities
Are you having a problem with the Orbi 970 series system? If so, please be more descriptive and give details.
Backhaul is only between the RBR and RBS. Having not enough RBS or too many RBS and distances inbetween the RBR and RBS can cause problems with the backhaul.
Please review this PDF guide on some troubleshooting information for Orbi systems:
Orbi MESH Troubleshooting, Suggestions and Tips | NETGEAR Communities
https://community.netgear.com/kb/en-orbi-knowledge-sharing/using-signal-strength-detection-to-place-orbi-satellites-faq/2472938
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6A STP is recommended.
How many RBS are deployed?
What is the size of your home? Sq Ft?
What is the distance between the router 📡 and satellite(s)🛰️? 30 feet or more is recommended in between RBR 📡 and RBS 🛰️ to begin with depending upon building materials when wired or wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite ‌‌🛰
Currently have a 973 system online. Not seeing any issues with backhaul and smart IoT devices connected. 50+ devices.
5000 sq ft home. Two RBS deployed. Can get away with one RBS. Wireless connected.