NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NAT loopback fails for clients connected through RBE370 satellite
I’m using an Orbi RBE371 router with an RBE370 satellite, and I’ve found what looks like a NAT loopbackNAT issue. NAT loopback works normally when a device is connected directly to the main route...
I don't have IPV6 at all and i tried multiple forwarded ports and none of them work on the satellite
i tried multiple forwarded ports and none of them work on the satellite
How about a port that isn't forwarded? That should normally work locally, but fail when remote.
A port that isn't forwarded wouldn't work with the public IP or ddns anyway though? i'm sorry am i misunderstanding something?
A port that isn't forwarded wouldn't work with the public IP or ddns anyway though? i'm sorry am i misunderstanding something?
I get that you need it to work on a forwarded port. I was thinking you could also test an unforwarded port (just to see if port forwarding was part of the problem). But that can't work because the router isn't listening on the destination port. So my bad.
One other question - are you testing using the 370 wifi network? Or are some of the tests using the LAN? When I have a chance, I can try this on my 870 - hopefully other Orbi users can also try it on their systems.