NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Ayuda configuración Switch GS716Tv3
Buenos días, primero que nada presentarme:
soy profesor de un centro de educación secundaria y acudo a la comunidad Netgear solicitando ayuda. La cuestión es la siguiente:
tenemos un Switch GS716Tv3, por estrenar y que no sabemos configurar. La idea era pedir a alguien del foro si tiene algún aparato del mismo modelo en funcionamiento, y nos pudiera pasar una copia de la configuración para poder volcar y así poder hacer uso del mismo.
No necesitamos ninguna configuración especial, simplemente la configuración del aparato básica para poder instalar y poder tener servicio en los 16 puertos de salida.
Si hay algun compañero del foro que estuviera dispuesto, nos haría un gran favor.
Muchas gracias de antemano.
Saludos.
Start your adventure on the switch here https://www.netgear.es/support/product/GS716Tv3.aspx
Firmware downloads are under [Descargas] https://www.netgear.es/support/product/GS716Tv3.aspx#download remember the firmware is coming in a zip which needs to be expanded (two files, firmware archive and some release notes).
https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_SWA_25Sept2013.pdf - p. "HTTP File Upload" - Maintenance > Upload > HTTP File Upload You can upload the firmware image (nickname "Archive") into the image1 section for simplicity, because your system is new, and the image1 is defined as the default boot section. (yes, all confusing for historical reasons ref. up- vs. download for example)
Documentation is available on [documentación] https://www.netgear.es/support/product/GS716Tv3.aspx#download (except from the installation guide it's all in English only when I have it right).
Regards
-Kurt (from Switzerland)
PS. My Spanish is very limited, reading is ok - but no chance to write something meaningful 8-)
5 Replies
There is not much required for a simple set-up - you don't need to grab any kind of pre-made configurations:
- Firmware update
- Set a strong password
...and up you go to start with!
Buenos días, primero que nada darte las gracias por contestar.
Creo que este Switch es gestionable, y según tus indicaciones, si actualizo el Firmware no necesito ningún tipo de configuración para funcionar. He entendido bien?
Si esto es así, puede indicarme la pestaña donde se actualiza el Firmware cuando accedo al mismo? Descargo el nuevo Firmware de Netgear.com?
Muchas gracias por tu ayuda.
Saludos
Start your adventure on the switch here https://www.netgear.es/support/product/GS716Tv3.aspx
Firmware downloads are under [Descargas] https://www.netgear.es/support/product/GS716Tv3.aspx#download remember the firmware is coming in a zip which needs to be expanded (two files, firmware archive and some release notes).
https://www.downloads.netgear.com/files/GDC/GS716TV3/GS716Tv3_GS724Tv4_GS748Tv5_SWA_25Sept2013.pdf - p. "HTTP File Upload" - Maintenance > Upload > HTTP File Upload You can upload the firmware image (nickname "Archive") into the image1 section for simplicity, because your system is new, and the image1 is defined as the default boot section. (yes, all confusing for historical reasons ref. up- vs. download for example)
Documentation is available on [documentación] https://www.netgear.es/support/product/GS716Tv3.aspx#download (except from the installation guide it's all in English only when I have it right).
Regards
-Kurt (from Switzerland)
PS. My Spanish is very limited, reading is ok - but no chance to write something meaningful 8-)