NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
BRIDGING ISSUE WITH C7100V NIGHTHAWK AC1900 WIFI CABLE MODEM ROUTER
The above model with the most updated firmware version of V2.01.30 Cannot be bridged. After numerous calls to netgear support, i was finally told by a Linksy's tech, who went above and beyond for me...
I just bought a Netgear C7100V cable modem to use with Comcast Network.
What i did to get it to work in Bridge mode is: In configuration mode go into advance look for gateway, there is another (options or check box right beside the Gateway.
Move over from Gateway check box to the next, that will put you into bridge mode.
save your settings.
My problem now if i used 192.168.100.1 or 192.168.0.1 I'm not been allowed to get back into the modem.
After setting your modem to Bridge mode you have to boot both Router and switch.
I'm using Cisco 1941 Router and a Cisco 3560 Switch.
good luck.