NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Dohness
Jan 11, 2023Aspirant
Mobile devices randomly getting intermittent Wi-Fi connectivity.
This morning I noticed my iPhone was still connected to my Wi-Fi network but was unable to get connectivity. After some general basic troubleshooting including, forgetting the network and reconne...
Dohness
Jan 12, 2023Aspirant
Appreciate the response and suggestions, unfortunately the seems to still be persisting.
Additionally, it appears the speed issues I had mentioned in my previous post with my Xbox consoles has also returned.
At this point this leads me to believe this issue is with the hardware or FW with the CAX80 itself. I'm going to attempt a factory reset of the modem and start over from square one, if all else fails at this point the device will be returned to the retailer.
FURRYe38
Jan 12, 2023Guru - Experienced User
Be sure to try channel 1 and 40.
Set 20/40Mhz coexistence to 40Mhz only.
Enable WMM, Beamforming and MIMO as well.
What Firmware version is currently loaded?
Please post a copy and paste of the modems connection status and event log page.
https://kb.netgear.com/30007/How-do-I-obtain-the-cable-connection-information-from-a-NETGEAR-cable-modem-modem-router
https://kb.netgear.com/30008/How-do-I-view-or-clear-the-event-logs-on-my-NETGEAR-cable-modem-or-modem-router