Netgear c7000v2 Port forwading from home to Hikvision Camera at Work?

> I have hikvision cameras [...]

> [...] the NVR [...]

   Not a very detailed description of any of those devices.

> [...] I was told I need to port forward ports [...]

   "told" by whom?  Are you following some instructions which others
might be able to see?

> [...] I enter the ports starting 80: ending 10554.

   Forwarding _all_ the ports 80 - 10554 is not a good plan.  If a
port-forwarding on the C7000v2 lets you specify only Starting and Ending
ports (as the User Manual shows), then I'd specify three single-port
rules: 80:80, 8000:8000, and 10554:10554.

> What values do I put in for the "Internal IP address"? [...]

   That would be the LAN IP address of your (unspecified) "the NVR".

   Visit http://netgear.com/support , put in your model number, and look
for Documentation.  Get the User Manual.  Read.  Look for "Set Up Port
Forwarding to a Local Server" and "Add a Custom Port Forwarding
Service".

   Presumably, your (unspecified) "the NVR" is your "Local Server".

   Pay attention to the suggestion: "See Reserve LAN IP Addresses on
page 66."

> [...] If I put in the router login the 192.168.0.1 - It tells me it's
> invalid IP.

   Yes, because you want the router to forward this stuff to the NVR,
not to itself.

> What values do I put in for the "External IP address"? [...]

   I'd say "Any", unless there's exactly one fixed external/remote
address from which you intend to use this stuff.

> [...] Is this where I put in the NVR ip?

   Your (unspecified) "the NVR" is not "External", is it?

> Also any sort of values I put in [...]

   Not a useful description.  How many billion addresses did you try?
If you didn't try all of them, then which ones did you try?   (And
why?)

Internal IP address is the IP address of the Camera.

Dont forward the whole range. Just specific ports needed. this is for security reason.

External IP address is your WAN/Internet IP address. It should be autopopulated.