NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
New CM205V Interferes with TV Signal
When a CM2050V is connected to a three-way coax splitter (the modem, and two TVs to Xfinity Voice/Data/Cable television service, it disrupts the signal to the two tvs. Disconnect it, and the TVs are...
Way too many correctable/uncorrectable errors for a 24 hour period of time.
DOCSIS 3.1 is backward compatible with DOCSIS 3.0. I do not think DOCSIS 3.1 is backward compatible with DOCSIS 2.0. If you are looking at DOCSIS 2.0 hardware, you want to check the coax type to ensure it is correct for the current DOCSIS 3.1 connections (RG6).
What were the upload/download throughputs with your new splitters in place?
You might find some ideas in chapter 3 of this reference: https://www.duckware.com/tech/solving-intermittent-cable-modem-issues.html
Info as requested. Looks like an awful lot of errors...
Info as requested. Looks like an awful lot of errors...
Yes, but you cut off the part that would provide more of a complete picture. Such as the system up time. The correctable/uncorrectable values accumulate over time and reset to zero when your modem is rebooted. With the information you provided, no one knows the time frame.
I don't see an uptime stat on the report generated by the CM2050V. I see it in the cable modem stats on the C7100V, which is currently online (for 114 hours of Up Time, it shows errors in the low thousands on downstream channels 1-16 and does not provide error counts on upstream channels. The CM2050V is not online at present. When I try again next week, I'll try to get more useful info. Sorry about that. Thanks again.
Also please post the firmware version on the CM modem.
I don't see an uptime stat on the report generated by the CM2050V. I see it in the cable modem stats on the C7100V, which is currently online (for 114 hours of Up Time, it shows errors in the low thousands on downstream channels 1-16 and does not provide error counts on upstream channels. The CM2050V is not online at present. When I try again next week, I'll try to get more useful info. Sorry about that. Thanks again.
It is at the bottom of the page on the screen, not shown in the generated report. See attached.
