NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
How to install two adapters (PLW1000v2) to Powerline WIFI 1000
Hi.
Is it possible to have 2 outputs (PLW1000v2) with the Powerline WIFI1000?
Best Regards Bente
That should work but you will not be able to buy a single PLW1000 plug. Like most powerline suppliers, Netgear sells them as bundles with two plugs. So you will end up with a spare "base" plug. You could use that for something else like a smart TV.
Remember, when adding a plug to an existing powerline network, you need to follow this:
>>> Adding a powerline adapter to an existing powerline network <<<
3 Replies
That should work but you will not be able to buy a single PLW1000 plug. Like most powerline suppliers, Netgear sells them as bundles with two plugs. So you will end up with a spare "base" plug. You could use that for something else like a smart TV.
Remember, when adding a plug to an existing powerline network, you need to follow this:
>>> Adding a powerline adapter to an existing powerline network <<<
Thank you. Then I will stop looking for a single plug.:smileyhappy:
Do you have a 'recipe’ on how to use the "base" plug with a smart TV?
If the Smart TV has a LAN port, then you just connect the TV to the plug with a LAN cable and configure the TV to use a wired connection. Once done, that's it.