Netgear A6210 Not Found

A lot of other people are having the same problem and Netgear is aware of it.  In the meantime, this procedure is a work around.  Since your Genie is already working, you probably do not need to re-download and re-install:

1. Run the file: A6210_v1.0.0.35 and as usual wait for the 'Plug in your adapter' message. 

2. When you get the 'Adapter not detected', click Cancel

3. Leave the adapter plugged in, do not remove it and go to Device Manager.

4. Under Network adapters you will see: 802.11ac Wireless LAN Card

5. Double click on this and goto the Driver Tab.

6. Click on 'Update Driver'

7. Now choose 'Browse My computer for Driver Software'

8. Now click, 'Let me choose from a list of device drivers on my computer'

9. Choose Netgear A6210 Wifi usb 3.0 adapter and click Next. The driver will be installed

10. Close down device manager.

11. Go to your wifi / internet iceon in the bottom right of your screen. If you are wired, change this to wireless and then connect to your network. 

12. The adapter should now be working

13. I then went to here: http://www.netgear.co.uk/home/discover/apps/genie.aspx?cid=wmt_netgear_organic and downloaded the genie software independently of the A6210 software and installed it.

14. It actually worked and now runs ok under Windows 10 with anniversary. Its a pain, I know, but until Netgear sort themsleves out it works, and to be honest the adapter itself is very good and when connected to my virgin Superhub 2 I'm getting 140mbs download. compared to 10 over my very o