NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear Wireless N150 Access Point WN604 Losing / Forgetting Settings after Reboot
I have a NETGEAR Wireless N150 Access Point WN604 which is losing / Forgetting Settings after Reboot or power cycle. It loses among other things the following settings: • Access Point Name • NTP...
I had the same problem. I did what ScubaClaude suggested but it didn't work. Eventually I restored the factory settings of the AP.
Now it is working fine :-)
Antonio.
Hi filicaja,
Welcome to the community!
Thank you for your contribution, I belive this issue may have been fixed by using the newer firmwares. You can download latest versions here.
Thanks,
I have the same problem also.
The most annoying reversion/loss is that of the Primary DNS Server. It keeps reverting to 192.168.1.1 and keep having to change that to 192.168.1.254 to accomodate my UVerse router/modem. Until that is done, the AP is horribly sluggish and may take as long as 2 minutes to display a page.
The wireless AP broadcast name keeps resetting to one I used a few years ago and WILL NOT ratain a newer name I've given it. Along with this, the registration keeps popping up and greying out all the choices until I hit one of the buttons. I have registered this AP at least 10 times, yet this registration request keeps popping up every time I access the equipment.
I have downloaded and tried the firmware update offered by JohnRo, but this didn't seem to help. I am now at 3.3.1, but I see there is a newer version of 3.3.2. Will that help?:
Bill
