NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Configure two Nighthawks behind a Ubiquity edge router
Hi,
I will be installing 2 Nighthawk R7800 behind a Ubiquity Edgerouter X. The first Nighthawk will provide wireless SSIDs and should have DHCP disabled (Bridge Mode or just disable DHCP). The second Nighthawk will be placed in an area that currently has a poor wireless performance.
What is the best way to configure the Nighthawks.
Thanks for your help.
One some of my routers, in ap mode, you leave it plugged into the wan port. On others, you have to move it to the lan port. you can check your specific devices settings and it'll show you. I believe for the R7800 you can leave it in the wan port.
https://kb.netgear.com/000061927/What-is-the-difference-between-router-mode-and-AP-mode
4 Replies
If they're both hardwired in, you should just be able to place both in access point mode. That disables the dhcp and lets the ubiquiti run the routing portions.
Thank you for the fast reply.
To make sure I have this right. Plug into a LAN port on each Nighthawk and nothing in the wan port? Will AP mode let me set the SSID and pass phrase? Just use the same settings on each Nighthawk?
One some of my routers, in ap mode, you leave it plugged into the wan port. On others, you have to move it to the lan port. you can check your specific devices settings and it'll show you. I believe for the R7800 you can leave it in the wan port.
https://kb.netgear.com/000061927/What-is-the-difference-between-router-mode-and-AP-mode